The use of a special pump with a vacuum mechanism helps not only to strengthen the erection, but also to increase the size of the penis, as well as to achieve a longer intimate contact.The principle of operation of this device is the difference in air pressure pressure from the flask in the pump, the penis increases in volume and accepts the upright state.
In addition, regular training with a vacuum pump is cured of the pelvic organs, enhancing blood circulation and saturated tissues with oxygen, vitamins and trace elements.Of course, in order to achieve all these effects, it is necessary to use the pump properly.We will tell you how to use a vacuum pomposity in this article.
The pump mechanism
The design of the vacuum pump is a cylindrical flask and a pump with which the air is pumped from this flask.In it, the genitals are placed during the procedure.Due to the effects created by air and airless space, using the device, the result is achieved to increase the penis parameters.
The process is as follows:
- During the pumping of air the pressure decreases from the flask;
- The blood circulation increases sharply, the blood actively rushes to the tissues of the penis;
- During negative pressure, the blood flow is increased;
- The caves that make up the fabric of the falls are filled with blood;
- The blood vessels of the penis enlarge it - both in length and volume.
Such training with a vacuum pump allows, with the regularity of their implementation, add up to 4 cm to a length of a month and in range - up to one and a half.It is necessary to use a vacuum pump for this every day-2-3 times a day, approaching 20 minutes.
How to use it properly
Milking that classes with pomposity are high quality and effective is necessary to master the right technique.Penis pumping errors can cause injuries - a gap of blood vessels, hematomas and edema.Beginners are especially advised to pay attention to the rules for using a vacuum pump.
The general rules and recommendations for pumping the genital organ include the following points:
- Carefully follow the hygiene of the genitals before and after the procedure;
- Also, before and after using the pump, clean the penis and pump with hot water and soap;
- Before the procedure, perform the penis heating with a towel dipped in hot water or a bath/shower;
- The initial use of the pump should be short - about 5 minutes;
- Then the weather should be increased gradually, eventually reaching 15-20 minutes;
- The increase after single use will last about 2 hours;
- Erection after pumping will remain 30 minutes - hour.
The use of a vacuum pump is effective to quickly increase a member before intercourse.
In general, all types of devices are effective, but the rules for use can vary depending on the type of device.
During the use of the pump, it is necessary to monitor the skin of the genitals and their general condition.In the case of infectious and inflammatory processes in this area, it will be necessary to refuse to use the pump.
Air valves
After preparing for use using hygiene and warming, carefully examine the instructions.Proper use of the device and adherence to the technology will avoid the injury and make the process safe.
The use scheme is the following:
- The vacuum cylinder should be tightly pressed against the base of the penis barrel.If an erection ring is attached to the kit, place it, pressing it to the pubis.
- Gradually start pumping air with pear;Movement should not be too intense.
- Continue the first lesson in 5 minutes;Over time and experience, increasing it to 10.
- In case of pain, stop using.
- Between the approaches it is necessary to take a break of 30-60 seconds;At this time it is recommended to have an intimate massage.
- In one procedure, it is recommended to perform 5 sinking approaches.
When using a simple pump with a manual mechanism, it will need to act independently;The electric version will do a job for you.The level of adhesion can be observed with the help of built -in sensors;The main thing is not to strive to increase the size of the penis as quickly as possible.Tissue enlargement is a complex biological process and it must occur at a corresponding pace.
Hydropic
Water pumps are considered easier to use;This type of device allows you to have a gentle effect while remaining effective.The principle of operation of the hydraulicum is similar to the previous option.
Pumping is done as follows:
- Perform the pre -heating of the penis;
- Fill the flask of the device with hot water and directed down;
- Then put on the device by moving from the bottom up and pressing it to the base of the penis;
- Then it is necessary to give pompousness with a horizontal position and to begin to increase the pressure;
- Then the air must be pumped and drained.
In one procedure, it is recommended to perform 5 pumping approaches for up to 20 minutes.Make sure that the pressure is leveled before extracting the penis from the flask;Otherwise, you risk getting micro -cracks and other injuries.
Methods to pump a member
There are several different techniques for using a vacuum pump.The general procedure for all of them is the pre -heating of the genitals: this is possible with the help of a towel immersed in hot water, as well as the intake of a hot bath or shower;Make sure the water is not too hot.
In addition, before any type of pumping, it is recommended to warm yourself with your hands - this can be both intimate massage techniques and stretching, etc.
Packing
This technique for using the pump is designed to have maximum effect on the penis.It is intended to a greater extent for penis lengthening.In this case, the genitals must be placed in a flask of a slightly larger diameter than the phallus itself.
The packaging is executed this way:
- As a preparation, it is necessary to achieve an erection level of 80%;
- Then it is worth using the lubricant and tightly press the cylinder to the pubis;
- Check that the sliding process is smooth;
- Set the minimum load and follow the sensors, noting your feelings.This is useful for further determining the required load.
At first, do not put the voltage to the maximum and do not completely stretch the member - this can be done by removing air from the cylinder not completely.The first set should take 10 minutes.During the execution of the second set, increase the pressure and extend the time to 15 minutes;On the third - reinforce the tension and pump in 20 minutes.
You need to take 5 minutes between these approaches;Prior to each subsequent approach, the erection level should be increased to 90 %.You need to train this way within a week;During the second week, pumping loads increases.The maximum pumping time is 25 minutes.
Technique of a classic member of members
The classic method of using a vacuum pump to enlarge the penis in both parameters includes two basic techniques:
- Stretching the protein membrane;
- Increase the cavernous bodies of the penis.
The schemes of their implementation are slightly different from each other.
Extension training
- Scrotum massage for 5 minutes;
- Ferry warming for 5-10 minutes;
- Stretching up, down and to the sides-10-15 minutes;
- High voltage - 10 minutes;
- Reverse Stretch/Sadsak/A-Resting-10 minutes;
- Jelking (dry or moist) - 50 reps;
- Packaging - 3 approaches.
Vascular technique to increase volume
- Scrotum massage - 5 minutes;
- Warfare - 10 minutes;
- Forward with medium intensity - 5 minutes;
- Jelking - 100 movements;
- Flexia of upright penis - 10 minutes;
- Sitting on a penis with incomplete erection - 10 minutes;
- One approach to pump.
The number of approaches and interruption between them remain similar packaging techniques;However, the pump cylinder should be wider, which will work well to increase the volume.
In the break between the approaches, press the penis;Do it carefully to prevent painful sensations.
After the end of the whole procedure, it is recommended to apply a basic moisturizer to the genitals - for example, a baby body lotion or to use a special bruising ointment.
At what stages the procedure is made up
As you can already notice, the process of using a vacuum pump includes several stages.In order to achieve the desired result, it is necessary to monitor the priority.We do not recommend you skip the stages or change them to places - the correct execution will be the key to the safe use of the pump.
Warming
Before using the pump, it is necessary to disperse the blood.To do this, penis heating is done - this can be done with a ferry, a hot cloth compress or, with a simple shower/bath.
Jelking
Stretching the Jelking technique is used as a preparation before using the pump.It is necessary to carry out the "milking" of the penis, before lubricating the genital organ with a lubricant.The root of the barrel is compressed by the capture of the thumb and forefinger;This capture moves forward to the head.For the appearance of an average erection level - about 50% requires 50 such movements;For the maximum permissible level of 80-90%-about 100 reps.
How to put the pump properly
The cylinder pump must be placed on a member in a semi -interactive state.The barrel of the penis, pubis and the rim of the flask is treated with a lubricant.At the same time, do not allow lubrication to the scrotum to prevent it from absorbing it in the flask.
You should then create a sealed space with rotating movements and slowly pressing the pump in the pubic area.It will also allow lubrication evenly.Make about 5 such movements to achieve full tightness.
Pump
The use of a vacuum pump can be done in two ways - with maximum and minimal injection.
- The minimum accumulation of lymph
It is necessary to determine an easy degree of pressure.The suction process should not carry discomfort.After the absorption is completed, make several movements to the flask, touching the genital organ.
You should feel a pleasant pulsation and a change in pressure within 10 minutes.In the next 5 minutes it is necessary to increase the pressure more.If at the same time you feel burn or tingling, reduce the pressure on one value.
At the end of the procedure, the genitals must become more severe;It should be taken in the hand and perform a slight shaking.Then lubricate the member and perform the milking technique.
In the second approach, increase the pressure from one unit and the third - by two.At the end, follow the Jelking technique.
- The maximum accumulation of lymph
This technique allows the maximum to increase the element to volume due to the powerful ejection of the lymph.This happens due to the lack of massage between approaches;At the same time, the total implementation time is about an hour.
- Perform the usual pressure level for 5 minutes;
- For one minute, set the pressure on the minimum level;
- After repetition the first approach;
After an hour of such a session, do drigating and then shake the organ about 50 times to get rid of stress.
The end of the session
After all, it is necessary to slightly reduce the load on the penis.For this:
- It is recommended to urinate after the procedure;
- If possible, take a bath or shower;
- Place a rubber ring on the barrel of the member and hold it for 40 minutes.
The above manipulations are called the pumping technique of a member in ZOINKERT;It is popular with men around the world.
Beginner
The above Zoinzker technique is also suitable for beginners.During its implementation, it is worth considering the following nuances on how to use a vacuum pump:
- If at the end of the procedure you mark the softness of the penis, lethargy and weakened erection, the load must be reduced;
- To eliminate the accumulated lymph, you can use a gel with bad;
- It is strongly recommended to heat the device before a member is placed;
- Do not neglect the use of gel Lord.
Elementary users need to understand that approaching pumping immediately at maximum indicators can be dangerous and lead to various injuries.Even with a minimum pressure, you need to monitor your own feelings;For maximum parameters can be switched to only a few months of regular use of a vacuum pump.
How to take care of pompos
- After the purchase, the new pump must be thoroughly washed with hot water and soap and treated with a disinfectant;
- The same actions must be performed before and after each use of the vacuum pump;
- Wipe the device dry after cleaning and allow it to dry completely;
- In order for the pump to serve longer, we recommend using water-based gel waste rather than fat.Do not use creams and gels containing oil refining products in your composition - such as mineral oil;
- You can't boil the pump as well as treat it with alcohol -containing agents - choose an immortal antiseptic.
Safety precautions
You need to know the rules for the safe use of a vacuum pump - otherwise the risk of side effects is increased: edema, hematomas, redness, vascular damage, etc.Also, excessive tension can cause tissue necrosis, tearing of ligaments and chronic dry skin.
The recommendations and rules for the safe use of the pump given by manufacturers are as follows:
- If painful or unpleasant sensations occur during the procedure, stop the session immediately.Understand the cause of the discomfort - if this is an injury, the classes must be stopped until complete healing;
- The load should be increased seamlessly, adding one unit each week.Achieving the effect depends primarily on the regularity of the classes, not on the force of impact;
- Beginners are not recommended to perform sessions of pumping for more than 40 minutes;Experienced users should use the device for no more than an hour in a row.Too long the effect of the vacuum can critically disrupt blood circulation;
- You should also not perform more than three sinking sessions a day - too frequent use of the device can have the opposite effect.
Contraindications to use
It is worth remembering that in some cases the use of vacuum pumps may be contraindicated.These include such diseases and body condition:
- Chronic diseases and infectious and inflammatory processes in the field of the geniopoliase system;
- Problems with liver and kidney function;
- Pathology in the preputium;
- Diseases of the cardiovascular system;
- The risk of blood clots;
- Diabetes.
We recommend that you start pumping only after consulting a healthcare professional to avoid negative health effects.Starting before you start using a vacuum pump, we also advise you to carefully study the technique of using photos and video instructions and get acquainted with reviews.
Concluded
Increasing a member when using a vacuum pump is more than real - and we are talking not only about the length of the penis, but also about its diameter.This result can only be achieved by regular and long -term classes, with a condition for competent use of the device.
For beginners, we advise you to turn to pumping with caution and to pay special attention to preparing for the procedure, trying not to overdo it.